Weaver 43

If you 27re looking for a true head-turner that blends classic Chesapeake Bay style with cutting-edge performance, this 2024 Weaver Boatworks 43 foot Bay Boat delivers in every way. Handcrafted in Maryland by some of the best in the business, she 27s equally at home cruising with family, anchored in a secluded cove, or chasing fish offshore. This is not just a boat 2D it 27s an experience. From her sleek lines to her premium fit and finish, every inch has been designed for comfort, efficiency, and versatility. She 27s fully loaded, lightly used, and ready for immediate enjoyment.

Whether you 27re planning sunset cruises with friends, long weekends exploring the Bay, or heading offshore for serious sportfishing, this Weaver 43 27 is a rare opportunity to own a near-new, custom-built masterpiece without the wait.

Construction includes a planning modified deep V hull with tumble home transom, flared bow, lifting strakes and hard chines. The hull is built with 1 layer 9 mm and 1 layer 6 mm Okume plywood, 2 layers 1708 E-glass outside bottom impregnated with epoxy, laminated Douglas fir stringers glass encapsulated, 2 layers 1708 E-glass inside bottom to chine, hull sides layers 1-6 mm and 1-9 mm Okume plywood, 2 layers E-glass outside impregnated with epoxy, epoxy coated Okume from chine to sheer, laminated Douglas fir battens, sheer clamp and chines. All bilges and engine compartment are gelcoated. The house sides have 2 layers 12 mm Okume plywood, floor has 2 layers 6 mm Okume plywood over 1 bd Nidacore, and 1 layer E-glass impregnated with epoxy each side. Windows are 1/4 22 tempered tinted glass for side, back and door window. The hull has a buildup of epoxy mixed with sandable fairing compound and block and sanded smooth. Dockside and overboard pump outs for holding tank. Awlcraft high gloss polyurethane boot stripe with 6 primer coats of paint. Finish paint is Awlcraft 2000. Ablative/Copolymer anti-fouling bottom paint with 3 coats using Interlux Interprotected epoxy primer system.

General interior features custom crafted cabinetry and doors with wood to be determined from builder 27s selection. Cabinetry constructed with combination of plywood, Divinycell, tri-cell and Nida-core. Countertops are KVF or Corian. Chrome hardware throughout. Amtico flooring where specified to be selected by owner.

Exterior finishes include Awlcraft 2000 paint.

General specs include (2) 180 gallon tanks, 55-gal water capacity, 8 22 muffler by Centek, aluminum fuel tanks, Vetus 8 22 bow and stern thruster with joystick controls, SeaStar Optimus Steering, (1) 16,000 BTU and (1) 12,000 BTU AC Crusair with digital control, ONGARO windshield wiper deluxe system.

Décor features all hardware metal finishes in Chrome throughout, designer carpet in forward bunk area, designer fabrics by Kravet for forward bunk, Ultraleather seating in salon and dinette.

Main salon includes electric sliding composite door, electrical panel, (1) 16,000 BTU and (1) 12,000 BTU AC Crusair digital control, tinted 1/4 22 tempered glass, Ultra Leather sofas and dinette constructed by Costa Marine Canvas, Inc., air conditioning with reverse cycle heat and individual temperature control, decorative throw pillows for sofa, fixed side windows with tinted, tempered glass for style and natural lighting, overhead LED lighting, outlets in head, galley kitchen area and outlet with USB connection in dinette area, main electrical panel with AC selector breakers, Whisper Wall headliner with owner 27s choice of color, 1/8 22 foam and tricot backing, teak laminate cabinetry with drawers, TV lift installed for 40 22 TV, microwave/convection oven located in galley cabinet, stainless steel under-mounted sink in countertop with chrome galley faucet, KVF or Corian countertops and sink with single lever faucet.

Appliances include refrigerator and microwave/convection GE or compatible.

Head features fresh water flush Raritan Atlantes head, A/C supply, wallpapered walls, overhead LED lights recessed in ceiling, medicine cabinet with mirrored doors, 120V GFCI receptacle, wet head shower with shower track, towel bar and ring in chrome finish, exhaust fan.

Forward bunk has (2) V bunk beds, soft goods by Costa Marine Canvas, Inc. including covered cushion, carpeted floors, air conditioning/heat with temperature control, hanging locker in teak with bar for hanging clothes, Whisper Wall headliner with owner 27s choice color, 1/8 22 foam and tricot backing, storage cabinet located under hanging locker.

Running gear includes flush mount Nibral strut, (1) Aquamet 22 DN double taper shaft 2 1/2 22 shaft, 4 blade Nibral propellers by Veems, 1 bd 22 stainless steel rudder, dripless rudder ports and glands by Tides Marine, shaft tube with dripless shaft seals by Tides Marine.

Forward deck has polished stainless-steel plow type anchor with 20 27 chain and 250 27 of rope, non-skid walk area, cleats, (1) Vetus anchor pull windlass system operable from deck or wheelhouse.

Cockpit features teak covering boards, transom livewell, stainless steel insulated ice bin, (6) rod holders in covering boards, dockside electric connection (2) 30-amp SS shore power inlet and (2) 50 Hubbell 30A yellow vinyl shore cable, dockside water connection in cockpit, fresh and salt water wash down with hose bib located under gunwale, waterproof deck hatch with access to steering system, trim tabs, generator and pumps, painted non-skid deck, self-bailing cockpit with scuppers, deck fill freshwater tank from dockside inlet.

Engine room and mechanical includes Scania 900 HP 13 liter engine (1 ZF 400 IV electronic transmission at 1.76 ratio), (1) SeaKeeper 6 Gyro, battery switches Blue Sea Systems, Onan 9 KW generator with sound shield, (4) bilge pumps, internal sea strainers for generator and all other sea water pickups, muffler engines linear type located in engine compartment, muffler generator, PEX plumbing fresh water system with manifold system to isolate individual areas, propellers Class 22S 22 pitch tolerance (ISO 484/2) and dynamic balancing, advanced design cambered blade sections for optimum performance, Nibral alloy for maximum durability, Racor fuel/water separator filters for main engines and single for generator clear bowl type top-loading for convenient replacing, rudder Nibral composite rudder bearing with dripless seal laminated into hull, seacocks bronze ball-type sea valves for all thru-hulls below the water line, shaft (1) Aquamet high-strength stainless steel double-taper with machined keyway, struts thru-water Nibral bearings, Tides Marine water lubricated dripless shaft seal.

Plumbing includes hot & cold water supply, Atwood 11-gal hot water heater, 55 gal water tank, 35 gal holding tank.

Electrical system wired to ABYC standards with all wires labeled at each end, (2) 30-amp cords AC shore power cords, Paneltronics panels, transom mounted zinc, all necessary wiring to supply all specified 110 volts and 12-volt systems, 120V AC power supply, anchor light/navigation lights, batteries (3) independent 12V banks maintenance free, battery charger with thermal cutoff and switching system for complete integration, battery distribution panels with battery cutoff for ship service batteries and engine batteries, bonded electrical system with ground plate, DC LED interior lighting throughout excluding companionway.

Miscellaneous includes (2) fire extinguishers, side-mounted grab rails aluminum on top of cabin top, stainless steel bow spring and stern cleats thru-bolted, zinc on transom.

Electronics include dual Garmin chartplotters with sonar at helm, radar, side scan transducer-fishing setup, single 27 22 Garmin chartplotter screen exterior hanging from top fishing setup.

Extras include underwater lights, spotlight on hardtop, ACR alternator setup, oil transfer pump, teak toe rail, step box, Propspeed added Fall 2024, additional port outlet with 2 USB, under gunnel lights (4) Lumitec 12 22 bar lights, Garmin display box, tackle box, additional rod holders (2) at transom.