Overview

LE TI is a low hour Hinckley Talaria Picnic Boat that offers you the opportunity to enjoy a combination of performance and comfort. She is perfect for entertaining family and friends on a local cruise or a weekend trip. She is a real eye catcher in the classic Hinckley style and affords you the opportunity to explore areas that others cannot with her 18' draft and jet drive.

The long cockpit is made to order for entertaining, sunbathing, or wetting a line if that is your preference. There is adequate seating and the engine box doubles as a large picnic table or additional seating.

Performance and economy, powered by the single Yammer Diesel six-cylinder engine is outstanding. You can expect to cruise around 28 knots with speeds at Wide Open Throttle in the low-to-mid 30 knot range. Fuel economy is outstanding as well. She features the Hamilton Jet Drive which has been around for a long time and allows your Hinckley to cruise where others cannot, drawing only 18 inches. Paired with the Jet Drive Joystick she offers excellent maneuverability and a quiet ride and no props, rudders, or struts to damage a grounding.

Below decks is a surprisingly spacious galley with a two-burner stove, a teak and holly sole and varnished mahogany. To starboard is a large head with ample counter space and a shower as well as a large V-birth which makes her comfortable for a weekend cruise.

Additional photos will be added shortly. An insurance survey is available on request.

Don't miss the opportunity to see this outstanding vessel. She is easy to see in Fort Lauderdale, Florida. The owner or LE TI has moved up to a new Hinckley.

Features

Forward anchor locker with plough anchor and rode storage
Pressurized fresh water sink - in engine box top
Insulated cooler - in engine box top
Pressurized fresh water cockpit shower
Electric Vacu-flush marine head with holding tank
Teak dash area, helm pods and cockpit coaming sides
Fusion sound system
Blue Awlgrip topsides
Cream Awlgrip Decks
Self-draining forward anchor locker with flush hatch
Custom 316L stainless steel Hinckley bow chocks
Rounded, tapered, varnished teak toe rail with Hinckley profile
Stainless steel pop-up mooring cleats
Hull is DualGaurd Composite construction Kevlar E-glass skin with balsa and Corecell core carbon fiber inner skin, SCRIMP with vinyl ester resin
Deck and cockpit are E-glass with balsa and Corecell core, SCRIMP molded with vinyl ester resin
Stainless steel half-round on fiberglass molded rub rail
Marelon ball-valve seacocks
Hinckley designed heavy-duty fiberglass swim platform has teak insert treads, stainless steel mounting brackets and half-round rub rail
Wrap around 3-window curved windshield with tempered glass and teak trim and cap
Port and Starboard forward windshield wipers with washers
Teak cockpit side coamings
Teak cockpit sole - with direct overboard drain scuppers
Storage: (1) Stern seat locker, (2) Settee lockers, (1) Flush cockpit sole locker with hatch
Forward cuddy cabin with sliding molded door accessed from companionway between the helm and navigator dash area
Cushioned L-shaped seating lounge area to port that seats four
Teak covered engine box top with built-in sink and insulated cooler
Cushioned aft facing settee molded in the stern end of the engine box
Full-width forward facing cushioned settee at the transom
Remote stereo speakers helm area and cockpit
Pressure water system
Cuddy cabin finished in satin-varnished cherry
This area has a 4' 1" headroom
Opening overhead hatch with screen for plenty of ventilation and natural airflow
Accommodations for two include a V-berth with cushions
V-berth sides are sheathed in varnished cherry wood
Varnished cherry trim
Vacu-flush 12-volt toilet between plumbed to a 10-gallon holding tank with deck pump-out and overboard discharge
(2) Frigast 12-volt stainless steel lights - port and starboard
Electrical breaker panel
Forward helm area with matching Red and White piping leather helm and passenger swivel/bolster chairs
Flush watertight cockpit sole hatch between chairs offers additional storage and access to systems below deck
(2) cup holders outboard to port
(2) Fusion marine stereo speakers port and starboard, outboard below each shelf
Passenger area has a glove box forward of the passenger seat with stainless steel handrail
Outboard varnished teak shelf with two (1) cup holder built in
A second varnished teak shelf opens for chart storage below
The helm station features varnished teak instrument pod and dash
15" Nardi stainless steel steering wheel with varnished wood rim
Varnished teak outboard shelf with cup holder and Jetstick
Hinckley Jetstick which integrates forward and aft motion steering and the bow thruster into a single joystick control
Engine gauges and controls
12-volt "cigarette style" outlet
Shore power inlet 110-volt 15-amp
Trim tab controls and deflection gauges
Lounge area just aft from the helm with an L-shaped settee and varnished teak shelf cap
Varnished teak top covered engine box with electric-lift access to engine area
Top-opening access to a sink and faucet with pressurized freshwater
Top-opening access to an insulated cooler
Aft-facing cushioned seating for two on the aft end of the engine box
Engine box has electric lift forward and hinge aft
Full-width forward facing aft settee cushion seating at transom
Storage locker under transom seat/access to jet drive
Freshwater shower located under coaming starboard
Direct overboard drainage scuppers
Yanmar 6LYA-STP 440-hp 6-cylinder diesel engine with Hamilton 292 Jet Drive
Twin Disc ZF IRM 200 transmission
12-volt DC 5" reversible bow thruster
Hinckley Jetstick Gen2 steering control system integrated with bow thruster
Racor fuel filter/water separator
Tachometer with engine hours gauge
Gauges: Fuel, Oil pressure and Water temperature
Alarms: Low engine oil pressure, Hydraulic pressure, High water temperature
Oil transfer pump for engine and transmission
Manual hydraulic steering pump
(2) Electric Bule 2000, 12-volt bilge pumps with float switches
Lift jackets
Hand-held flare kit
Running lights
(2) Fire extinguishers
(4) Dock lines
(2) Fenders
Boat cover
Plough anchor with 30' chain and 175' of 5/8" nylon
Muir 1000 anchor windlass