Hunter Channel 27
£23,500 GBP
Conwy Marina, United Kingdom
Specifications
Make: | Hunter |
Model: | Channel 27 |
Price: | £23,500 GBP |
Year: | 1999 |
Type: | Yacht |
Length: | 7.8 metres |
Draft: | 1 metres |
Beam: | 2.8 metres |
Hull Type: | Monohull |
Engine Model: | 1GM |
Engine Count: | 1 |
Engine Drive Type: | Shaft |
Engine Manufacturer: | Yanmar |
Fuel Type: | Diesel |
Fuel Tankage: | 25 |
Country: | United Kingdom |
Location: | Conwy Marina |
Overview
Hunter Channel 27 notorious for their high quality build, excellent accommodation layout and ease of handling through self tacking jib and all lines leading back to the cockpit. Bilge keel this boat is perfect for exploring the local coastal waters, coves and bays and can take to the ground if needed only drawing 1m. Meticulously cared for this two owner boat is well equipped and will make a great cruiser for the start of the season. Antifouled 2024 and engine serviced 2024.
The Hunter Channel 27 offers six berths across two cabins with 2X doubles and 2X singles.
Built by Hunter Boats Limited (UK) and designed by David Thomas.
Features
- Yanmar 1GM 10HP engine
- Diesel inboard
- Shaft driven
- Martec freshwater cooling system
- Single cylinder
- 2 Blade prop with Stripper rope cutter
- Engine serviced in 2024
- New stern gland - Oct 2024
- New cutlass bearing - Oct 2024
- Antifouled and anodes replaced in 2024
- 2X batteries (1X engine/ 1X domestic)
- 240V Shore power with galvanic isolator
- Battery charger
- Rutland wind generator
- Hot water system heated by 240V power supply or by the engine cooling system
- Mikuni thermostatic forced air diesel heating (vents in main cabin, aft cabin and heads)
- Thermostatic 240V convertor heater in main cabin
- 240v convector heater in aft cabin
- Fractional stainless steel rigging
- Alloy Z spar
- Slab mainsail reefing (2001) with easy jacks and cover
- Jib furling (2001)
- 2X Lewmar winches
- High grade spinlock jammers on all lines
- Sail wardrobe including main sail, furling head sail, scooper
- Navigational lights
- Suunto compass
- NASA Clipper speed/log +depth duo
- Garmin GPS
- NASA Wind
- ICOM VHF radio
- Autohelm tiller pilot
- NASA Navtex pro
- Radar reflector
- Interfaced autohelm and GPS
- Fenders and warps
- Plough anchor with chain and warp
- Stainless steel boarding ladder
- Stainless steel guard wire
- Auxiliary engine bracket (wooden)
- Cockpit shower (Hot and cold)
- Life raft - Expires 2026
- Spray hood (Blue)
- Quicksilver dinghy
- Forward open V berth
- Good sized saloon with U Shaped seating (blue upholstery scheme) surrounding a double leaved teak cockpit table
- Saloon area can provide two further berths and has plenty of storage shelving, with large windows and curtains
- L Shaped galley with Plastimo 2 burner gas oven with grill, single unit fridge and fridge-freezer, stainless steel sink and plenty of storage and worktop space
- Large aft cabin with a spacious double berth and hanging locker
- Heads with wash basin vanity with hot and cold water, marine toilet with macerator pump out or alternative deck pump out bypassing the holding tank
- Thermostatically controlled shower with pump out for the shower tray
- GRP hull, deck and superstructure (white)
- Bilge keel
- Stainless steel pulpit, stanchions and guard wire
- Tiller steering