Asking PriceBroker
$725,000 USD
+27 moreMakeBaia
ModelAtlantica 78
Length221m
Draft221m
Overview
About this vessel
The owner has invested more than $400,000 in documented vessel expenditures during current ownership.
Main Engines and Propulsion
Twin MTU 16V2000 M91 diesel engines with Arneson Surface Drives provide high-performance surface-drive configuration. Extensive documented MTU service includes all 32 injectors removed, professionally tested, and reconditioned with new nozzles installed. Injector bores were inspected by borescope, and seals and gaskets replaced. Fuel-return components and related hardware were also replaced, with engines tested following completion.
Starboard-engine work included repairs to three damaged A-bank cylinders, three MTU cylinder heads reconditioned, and A-bank turbocharger professionally reconditioned. The engine was lifted from its bed for access. Oil pan was removed with gasket and associated seals replaced. Exhaust risers, mixing elbows, and exhaust system alignment were completed. Exhaust hoses and raw-water hoses were serviced, with raw-water suction hose replaced and new hose clamps installed. Engine tuning, dock testing, and sea trial were completed following repairs. MTU monitoring display was refurbished and programmed into the system. More than $86,000 in identified MTU engine, injector, and monitoring-system work was documented.
Generators and Power
Two Kohler generators with documented mechanical work and systems reported operational.
Climate Control
Air-conditioning includes replacement chiller and air-handler replacement with servicing and control-panel work. Hydraulic and air-conditioning repairs and additional component upgrades were completed. Approximately $41,598 in documented work was invested in air-conditioning, chiller, hydraulic, and air-handler systems.
Hull and Exterior
Recent yard work at Cable Marine included haul-out, blocking, and bottom preparation with Micron Extra SPC antifouling applied and additional coatings at waterline areas. Hull strainers were cleaned, underwater metals cleaned, and PropSpeed applied to underwater metals. Zinc anodes were furnished and installed as needed. Bow-thruster propellers were removed and reinstalled. Hull was polished and waxed. Documented invoice total: $25,130.58.
Major Marine yard work included haul-out, blocking, pressure washing, and relaunch. Bottom, drives, and underwater metals were soda blasted. Accessible antifouling coatings were removed and bottom prepared with Interlux epoxy primer and multiple coats of Micron Extra SPC antifouling applied. PropSpeed was applied to underwater equipment and propellers. Hull was polished and waxed, zinc anodes replaced, and bow thruster serviced. Starboard hull-side fiberglass and finish repairs were completed. Pilothouse and helm-window seams were recaulked. Three older underwater lights were removed and three Lumitec Sea Blaze underwater lights installed with new transformer. Documented invoice total: $61,398.16.
Hull and exterior improvements also include custom exterior wrap with two-tone gloss and satin dark-grey finish, exterior decking improvements, baseboard improvements, fiberglass repairs, port-side door work, tender-garage fiberglass work, window seam recaulking, and custom illuminated yacht lettering. Regular hull cleaning and ongoing professional exterior maintenance are part of the vessel's care.
Interior
Flooring was professionally refinished, with upholstery and soft goods upgraded. New bedding and towels were installed. Custom tables, television upgrades, and audio upgrades were completed alongside carpentry work, trim work, interior detailing, window tint, and air-conditioning and air-handler improvements.
Water and Plumbing
Water-pump work, water-system improvements, and water-tank-related maintenance have been completed. Plumbing-related maintenance includes a cockpit shower.
Safety and Compliance
Fire-suppression system, fire extinguishers, smoke detectors, and carbon-monoxide detectors have been serviced or replaced. Life raft is certified. Flares, life jackets, and additional lifesaving equipment are aboard. Approximately $6,748 in documented safety and compliance expenses were invested.
Tender
A 2003 Zodiac tender, approximately 12 feet long with JetDrive propulsion, is included in the sale and stored in the yacht's tender garage.
Specifications
The details
Vessel
MakeBaia
ModelAtlantica 78
Dimensions
Length overall221m
Draft221m
Features
On board
Twin MTU 16V2000 M91 diesel engines with Arneson Surface Drives
All 32 fuel injectors professionally tested and reconditioned
MTU monitoring display
Two Kohler generators
Replacement air-conditioning chiller and air-handler
Lumitec Sea Blaze underwater lights
PropSpeed underwater protection
Micron Extra SPC antifouling
Bow thruster
Life raft (certified)
2003 Zodiac tender with JetDrive propulsion
Custom exterior wrap with two-tone finish
Cockpit shower
